0x00000085 – Error_Is_Join_Target – a JOIN or SUBST Command Cannot Be Used for a Drive That Contains Previously Joined Drives

The 0x00000085 error, known as Error_Is_Join_Target, happens when someone tries to use a JOIN or SUBST command on a drive that already has other drives joined.

This can create problems like error messages and trouble accessing files. It usually occurs if the drive setup is wrong or if you're trying to link drives that are already connected to something else.

To fix this, check the drive settings and remove any joins that are causing issues. Understanding this error can help you manage drives better and avoid problems in the future.

Error meaning:

The "Error_Is_Join_Target" means you can't join or combine drives if they already have other drives joined together.

This helps keep the data organized and prevents mistakes or problems when you try to access or change the information.

Causes:

Potential reasons for the "Error_Is_Join_Target" message:

1. You are trying to use the JOIN or SUBST command on a drive that is already being used as a target for another JOIN command.
2. The target drive is already linked to a different logical path, causing a conflict.
3. The drive you are trying to use has other drives joined to it, which prevents new commands from working.
4. The system does not allow multiple connections or associations on the same drive.

Properly managing your drives can help you avoid this error.

Symptoms:

Symptoms of the "Error_Is_Join_Target" message:

1. When trying to use JOIN or SUBST commands, an error message pops up right away.
2. The drives do not show the correct settings, causing confusion.
3. Previously joined drives can create conflicts, leading to problems with drive mapping.
4. Accessing or changing the affected drives can cause the computer to slow down.
5. The operating system may show warnings when trying to use the problem drives.
6. Issues often come from incorrect drive setups or trying to change drives that are already joined.

Solutions:

Step 1: Check Drive Configurations

Look at your current drive settings to see if they are correct.

Step 2: Look for Joined Drives

Find out if there are any drives that are already joined.

These can cause problems with the new command.

Step 3: Remove Problematic Drives

If you find any drives that might conflict, remove them or dismount them using the correct command.

Step 4: Check for Active Sessions

Make sure there are no active sessions that are using the drive.

These can lock the drive and cause errors.

Step 5: Retry the Command

After making the changes, try to run the JOIN or SUBST command again.

Step 6: Seek Help if Needed

If the error still happens, look at system guides or ask for help from someone who knows about computers.

Impact:

Effects of the Error_Is_Join_Target issue on system performance:

1. Access Problems: Users can't access drives, causing delays in their work.
2. File Management Issues: Users can't use JOIN or SUBST commands, making it hard to organize files.
3. Collaboration Difficulties: Multiple users may face issues accessing shared drives, disrupting teamwork.
4. Operational Efficiency Loss: Overall work becomes slower and less efficient.
5. Risk of Data Loss: Important files might become hard to find or lose access to.
6. Increased Support Costs: More time and resources may be needed to fix the problem, leading to higher costs.
7. User Frustration: Users may feel annoyed and stressed due to these disruptions.

Relevance:

The Error_Is_Join_Target issue is mainly linked to Windows operating systems, especially Windows 7, Windows 8, and Windows 10.

It can also occur when using certain software that relies on drive mappings. When this error happens, it can stop people from accessing important files, making it hard for teams to work together.

This can lead to delays and frustration. Fixing this error is important to keep everything running smoothly and to make sure resources are used well.

Prevention:

To avoid the Error_Is_Join_Target issue in the future, follow these steps:

1. Don't use JOIN or SUBST commands on drives that already have joined drives.
2. Check drive settings regularly to spot problems before they happen.
3. Keep a list of all your drive mappings and settings to help when things go wrong.
4. Teach users the right way to use JOIN and SUBST commands to prevent mistakes.
5. Use monitoring tools that alert you when changes happen in system settings so you can fix them quickly.

Following these steps will help keep your system running smoothly!

People Also Ask

How Can I Identify Previously Joined Drives on My System?

To find drives you joined before, open the Command Prompt and type "subst" without any extra words. This will show you any virtual drives. You can also look at Disk Management to see all the drives and how they are set up on your computer.

What Operating Systems Are Affected by This Error?

This error mostly affects Windows operating systems. It happens when people use the JOIN and SUBST commands. Users might have problems when trying to work with drives that were joined before, and this can happen on different versions of Windows.

Is There a Maximum Number of Drives I Can Join?

Yes, there is a limit to how many drives you can join using the JOIN or SUBST commands. This limit usually depends on the resources your computer has and how many drive letters your operating system can use.

Will This Error Affect My Data Accessibility?

Yes, this error can make it harder for you to access the drives. It stops certain commands from working, which means you might not be able to get to your data until the problem is fixed.

Can I Automate the Process of Managing Drive Joins?

Yes, you can automate how you manage drive joins. Using tools like PowerShell or batch files can make this easier. These tools help set up drives quickly and reduce the need for doing things by hand, making everything faster and simpler.